Issues‎ > ‎Vol 6, issue 2‎ > ‎

sdj-10091

Effect of Different Disinfecting Solutions on some Properties of Maxillofacial Elastomers Over Time

Qaiss B. Al-Jumaili*, Salim A. Salim**


*Khanzad Training Center, Erbil, Iraq. 
**Department of Prosthodontics, College of Dentistry, Hawler Medical University, Erbil, Iraq.

Submitted: 17/07/2019; Accepted: 01/09/2019; Published 29/12/2019

DOI: https://doi.org/10.17656/sdj.10091

Abstract

Objective: The use of disinfectant solutions for a long time can cause distortion in the maxillofacial prosthesis. The purpose of this study is to check the efficiency of three disinfectant solutions on bacteria and Candida and to evaluate the changes in the color and the hardness of the silicon with the increasing of the time of disinfection.          

Methods: Twenty-eight samples of maxillo-facial silicon with dimensions of 4cm*1cm*3mm for each sample were used and divided into four groups. Group I: Normal saline 0.9 %, Group II: Sodium hypochlorite 3%, Group III: Thymol 2%, and Group IV: Neutral soap. The samples contaminated with isolated Staphylococcus epidermidis bacteria and Candida Albicans; each group immersed for 10 minutes and then 30 hours in testing solutions evaluating the growth of colonies. Hardness test was done for all testing groups by the use of Shore-A hardness tester after 30 hours of immersion for each group. Color stability was also done by the use of a digital Spectrophotometer for the same samples after the same period of immersion.

Results: Sodium hypochlorite and thymol solutions showed a highly significant difference on bacterial and Candida growth in both time intervals with no effect on hardness and color, Neutral soap showed a poor disinfection effect on microorganisms with a low significant change in the hardness and no effect on color stability.

Conclusions: Sodium hypochlorite 3% and Thymol 2% are very effective disinfection solutions on both bacteria and candida with very little effects on the hardness and color stability

                                                                                                                                                                                                                                                                                                                                             

Keywords: Maxillofacial, Disinfectant, Silicon hardness, Color stability.                                                                                                                                                                                              Full Article - PDF                                                                                                                                                                                                                                   
                                                                                                                                                                                                                                                                                                                                                   

References:

1. Mitra A, Choudhary S, Garg H, Jagadeesh HG. Maxillofacial prosthetic materials- An inclination towards silicones. J Clin Diagn Res. 2014;8(12):E08–13.
2. Mortellaro C, Garagiola U, Lucchina AG, Grivetto F, Milone G, Pappalardo S, et al. The use of silicone elastomer in maxillofacial rehabilitation as a substitute for or in conjunction with resins. J Craniofac Surg. 2006;17(1):152-62.
3. Zardawi FM. characterization of implant- supported soft tissue prostheses produced with 3D colour printing technology. Ph.D. thesis, school of clinical dentistry, University of Sheffield. 2012.
4. Zayed SM, Alshimy AM, Fahmy AE. Effect of surface treated silicon dioxide nanoparticles on some mechanical properties of maxillofacial silicone elastomer. Int J Biomater. 2014;Article ID 750398:1-7.
5. Hatamleh MM, Watts DC. Effects of accelerated artificial daylight aging on bending strength and bonding of glass fibers in fiber- embedded maxillofacial silicone prostheses. J Prosthodont. 2010;19(5):357-63.
6. Jin T, Bowley J. Clinical study on the maxillofacial prosthodontic treatment using dental implant: part I - color stability of maxillofacial elastomeric materials. Journal kap. 1988;36(2):379–88.
7. Visser A, Raghoebar GM, van Oort RP, Vissink A. Fate of implant-retained craniofacial prostheses: life span and aftercare. Int J Oral Maxillofac Implants. 2008;23(1):89- 98
8. Karakoca S, Aydin C, Yilmaz H, Bal BT. Retrospective study of treatment outcomes with implant-retained extraoral prostheses survival rates and prosthetic complications. J Prosthet Dent. 2010;103(2):118-26.
9. Ariani N, Visser A, van Oort RP, Kusdhany L, Rahardjo TB, Krom BP, et al. Current state of craniofacial prosthetic rehabilitation. Int J Prosthodont. 2013;26(1):57-67
10. Eleni PN, Krokida MK, Polyzois GL. The effect of artificial accelerated weathering on the mechanical properties of maxillofacial polymers PDMS and CPE. Biomed Mater. 2009:4(3):035001.
11. Goiato MC, Haddad MF, Santos DM, Pesqueira AA, Moreno A. Hardness evaluation of prosthetic silicon-containing opacifiers following chemical disinfection and accelerated aging. Braz Oral Res. 2010;24(3):303-8.
12. Polyzois GL, Tarantili PA, Frangou MJ, Andreopoulos AG. Physical properties of a silicone prosthetic elastomer stored in simulated skin secretions. J Prosthet Dent. 2000;83(5):572-7.
13. Goiato MC, Pesqueira AA, Santos DM, Zavanelli AC, Ribeiro PP. Color stability comparison of silicone facial prostheses following disinfection. J Prosthodont. 2009; 18(3):242-4.
14. Yilmaz H, Aydin C, Gul B, Yilmaz C, Semiz M. Effect of disinfection on the dimensional stability of polyether impression materials.J Prosthodont. 2007;16(6):473-9.
15. Goiato MC, Pesqueira AA, Santos DM, Dekon SF. Evaluation of hardness and surface roughness of two maxillofacial silicones following disinfection. Braz Oral Res. 2009;23(1):49-53.
16. Guiotti AM, Goiato MC, Santos DM. Evaluation of the Shore A hardness of silicone for facial prosthesis as to the effect of storage period and chemical disinfection. J Craniofac Surg. 2010;21(2):323-7
17. Keyf F. Change in a maxillo-facial prosthesis material effected from environmental factors: a clinical report. J Biomater Appl 2002;16(4):259-66.
18. Abu-Serriah MM, McGowan DA, Moos KF, Bagg J. Extraoral endosseous craniofacial implants. Int J Oral Maxillofac Surg. 2003;32(5):452-8.
19. Ariani N, Vissink A, Van Oort RP, Kusdhany L, Djais A, Rahardjo TB, et al. Microbial biofilms on facial prostheses. Biofouling. 2012;28(6):583–591.
20. Hermann C, Mesquita MF, Consani RL, Henriques GE. The effect of aging by thermal cycling and mechanical brushing on resilient denture liner hardness and roughness. J Prosthodont. 2008;17(2):318-22.
21. Schwartz IS, Young JM, Berrong JM. The effect of Listerine antiseptic on denture microbial flora and denture stomatitis. Int J Prosthodont. 1988;1(2):153–58.
22. Hawser SP and Douglas LJ. Resistance of Candida albicans biofilms to antifungal agents in vitro. Antimicrob Agents Chemother 1995;39(9):2128-31.
23. Niu C, Gilbert ES. Colorimetric method for identifying plant essential oil components that affect biofilm formation and structure. Appl Environ Microbiol. 2005;70(12):6951–56.
24. Ramage G, Saville SP, Wickes BL, Lopez- Ribot JL. Inhibition of Candida albicans biofilm formation by farnesol, a quorum- sensing molecule. Appl Environ Microbiol. 2004;68(11):5459–63.
25. Pina-Vaz C, Goncalves Rodriguez A, Pinto E, Costa-de-Oliveira S, Tavares C, Salgueiro L, et al. Antifungal activity of thymus oils and their major compounds. J Eur Acad Dermatol Venereol. 2004;18(1):73-78.
26. Braga PC, Alfieri M, Culici M, Dal Sasso M. Inhibitory activity of thymol against the formation and viability of Candida albicans hyphae. Mycoses. 2007;50(6):502–6.
27. Levinson W. Review of Medical Microbiology and Immunology. Mc Grow- Hill Lange, USA. 2010;11th ed.:94–99.
28. Gow NAR, Yadav B. Microbe Profile: Candida albicans: a shape-changing, opportunistic pathogenic fungus of humans. Microbiology. 2017;163(8):1145–7.
29. Hatamleh MM, Polyzois GL, Silikas N, Watts DC. Effect of extraoral aging conditions on mechanical properties of maxillofacial silicone elastomer. J Prosthodont. 2011;20(6):439-46.
30. Eleni PN1, Krokida MK, Polyzois GL, Gettleman L. Effect of different disinfecting procedures on the hardness and color stability of two maxillofacial elastomers over time. J Appl Oral Sci. 2013;21(3)278-83.
31. Hashizome LN, Hoscharuk MF, Moreira MJS. Effect of affordable disinfectant solutions on Candida albicans adhered to acrylic resin for dental prosthesis. RGO-Rev Gauch Odontol. 2015;63(3):309-14.
32. Lewis DH, Castleberry DJ. An assessment of recent advances in external maxillofacial materials. J Prosthet Dent. 1980;43(4):426-32.
33. Mancuso DN, Goiato MC, Santos DM. Color stability after accelerated aging of two silicones, pigmented or not, for use in facial prostheses. Braz Oral Res. 2009;23(2):144-8.







Creative Commons License © The Authors, published by University of Sulaimani, College of Dentistry