Issues‎ > ‎Vol 6, issue 2‎ > ‎

sdj-10093

Evaluation of Flexural Strength of Heat Cure PMMA Denture Base Material Reinforced with Various Concentrations of Zirconium Oxide Nanoparticle: An In-vitro Study

Lazyan L. Raouf *, Souza A. Faraj*, Bruska A. Azhdar**


*Department of Proshodontics, College of Dentistry, University of Sulaimani, Sulaimani, Iraq.
**Nanotechnology Research Laboratory, Department of Physics, College of Science, University of Sulaimani, Sulaimani, Iraq

Submitted: 01/10/2019; Accepted: 03/11/2019; Published 29/12/2019

DOI: https://doi.org/10.17656/sdj.10093

Abstract

Objective: The aim of this study was to investigate the effect of zirconium oxide (ZrO2) nanoparticle dispersion on the flexural property of heat-cure polymethylmethacrylate denture base material.        

Methods: Eighty specimens were divided into 10 groups of eight specimens; Group 1 unreinforced acrylic, group 2: treated with ethanol alcohol, Groups 3,4,5 and 6 reinforced acrylic specimens with 1, 3, 5, and 7 wt% of untreated zirconium oxide nanoparticle (u- ZrO2) and Groups 7,8,9 and 10 reinforced acrylic specimens with treated and sonicated zirconium oxide nanoparticle in ethanol alcohol (t-ZrO2). X-ray diffraction test (XRD) was used to study the dispersion quality of the tested specimens, and universal testing machine was used to evaluate flexural strength and flexural modulus. SPSS software program used to compare groups results statistically.

ResultsThe results revealed significant decrease in flexural strength with u-ZrO2 nanoparticle addition in different concentration groups (p<0.05), while with t-ZrO2 nanoparticle addition, above 3 wt% statistically significant decrease was noted as compared to the conventional group. However, the flexural modulus increased with increasing the both of u-ZrO2 and t-ZrO2 nanoparticles addition. XRD results showed better dispersion quality of the t-ZrO2 than u-ZrO2 throughout the acrylic resin denture base material.

Conclusions: Flexural strength decreased inversely with increasing u-ZrO2 concentration, while it decreases significantly above 3 wt% of t-ZrO2 nanoparticle concentration. The flexural modulus increased with increasing both of u-ZrO2 and t-ZrO2 nanoparticles. Reduced nanoparticle’s cluster size of t-ZrO2 allows more nanofiller to be incorporated to denture base materials with less adverse effect on the mechanical properties.

                                                                                                                                                                                                                                                                                                                                             

Keywords: Denture base, PMMA, Zirconium oxide nanoparticles, Mechanical properties.                                                                                                                                                                                         Full Article - PDF                                                                                                                                                                                                                                   
                                                                                                                                                                                                                                                                                                                                                   

References:

1. Asar NV, Albayrak H, Korkmaz T, Turkyilmaz I. Influence of various metal oxides on mechanical and physical properties of heat-cured polymethyl methacrylate denture base resins. J adv prosthodont. 2013;5(3):241-47.
2. Gad MM, Al-Thobity AM, Shahin SY, Alsaqer BT, Ali AA. Inhibitory effect of zirconium oxide nanoparticles on Candida albicans adhesion to repaired polymethyl methacrylate denture bases and interim removable prostheses: a new approach for denture stomatitis prevention. Int J Nanomed. 2017;12:5409-19.
3. Kamonkhantikul K, Arksornnukit M, Takahashi H. Antifungal, optical, and mechanical properties of polymethylmethacrylate material incorporated with silanized zinc oxide nanoparticles. Int J Nanomed. 2017;12:2353-60.
4. Soygun K, Bolayir G, Boztug A. Mechanical and thermal properties of polyamide versus reinforced PMMA denture base materials. J Adv Prosthodont. 2013;5(2):153-60.
5. Gad MM, Fouda SM, Al-Harbi FA, Näpänkangas R, Raustia A. PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition. Int J Nanomed 2017;12:3801- 12.
6. Gillani R, Ercan B, Qiao A, Webster TJ. Nanofunctionalized zirconia and barium sulfate particles as bone cement additives. Int J Nanomed 2010;5:1-11.
7. Shuai C, Feng P, Yang B, Cao Y, Min A, Peng S. Effect of nano‐zirconia on the mechanical and biological properties of calcium silicate scaffolds. Int J Appl Ceram. 2015;12(6):1148-56.
8. Gad MM, Rahoma A, Al-Thobity AM, ArRejaie AS. Influence of incorporation of ZrO2 nanoparticles on the repair strength of polymethyl methacrylate denture bases. Int J Nanomed. 2016;27(11):5633-43.
9. Azhdar B, Stenberg B, Kari L. Polymer-nanofiller prepared and high velocity cold by high-energy ball milling compaction. Polymer composites. 2008;29(3):252-61.
10. Nordell P, Nawaz S, Azhdar B, Hillborg H, Gedde U. Preparation and characterization of aluminum oxide–poly          (ethylene‐co‐butyl          acrylate) nanocomposites. J Appl Polym Sci. 2012;125(2):975-83.
11. Nawaz S, Nordell P, Azhdar B, Hillberg H, Gedde U. Stabilizer Activity in Al2O3/poly (ethylene-co- butylacrylate) Nanocomposites. POLYM DEGRAD STABIL 2011.
12. Javerberg N, Edin H, Nordell P, Nawaz S, Hillborg H, Azhdar B, et al. Dielectric properties of alumina- filled poly (ethylene-co-butyl acrylate) nanocomposites Part II-wet studies. IEEE Trans Dielectr Electr Insul. 2012;19(2):391-99.
13. Qadeer MI, Azhdar B, Hedenqvist M, Savage SJ. Improved oxidation resistance of SmCo magnetic alloy powders by silanization. Prog Org Coat. 2013;76(1):94-100.
14. Aguirre BC. 'Flexural strength of denture base acrylic resins processed by conventional and cad/cam methods'. Msc thesis 2017; Texas A & M University, USA.
15. Ahmed MA, El-Shennawy M, Althomali YM, Omar AA. Effect of titanium dioxide nano particles incorporation on mechanical and physical properties on two different types of acrylic resin denture base. WJNSE. 2016;6(03):111-19.
16. Gad MM, Abualsaud R, Rahoma A, Al-Thobity AM, Al-Abidi KS, Akhtar S. Effect of zirconium oxide nanoparticles addition on the optical and tensile properties of polymethyl methacrylate denture base material. Int J Nanomed. 2018;13(9):283-92.
17. Zidan S, Silikas N, Alhotan A, Haider J, Yates J. Investigating the Mechanical Properties of ZrO2- Impregnated PMMA Nanocomposite for Denture- Based Applications. Materials. 2019;12(8):1343- 54.
18. Vojdani M, Bagheri R, Khaledi AAR. Effects of aluminum oxide addition on the flexural strength, surface hardness, and roughness of heat- polymerized acrylic resin. J Dent Sci. 2012;7(3):238-44.
19. Alnamel HA, Mudhaffer M. The effect of Silicon di oxide Nano-Fillers reinforcement on some properties of heat cure polymethyl methacrylate denture base material. JBCD. 2014;325(2212):1-5.
20. ISO-1567:1999. International Standard. ISO 1567 for Dentistry—Denturebase polymers. Geneva, Switzerland: International Organization for Standardization.
21. Davim JP, Oliveira C, Barricas N, Conceição M. Evaluation of cutting quality of PMMA using CO2 lasers. Int J Adv Manuf Technol. 2008;35(9- 10):875-79.
22. Salih SE, Oleiwi JK. Investigation of hardness and flexural properties of pmma nano composites and pmma hybrids nano composites reinforced by different nano particles materials used in dental applications. ETJ 2016;34(15):2838-53.
23. Gad M, ArRejaie AS, Abdel-Halim MS, Rahoma A. The reinforcement effect of nano-zirconia on the transverse strength of repaired acrylic denture base. Int J Dent. 2016;7094056.
24. Alla RK, Swamy KR, Vyas R, Konakanchi A, Guduri V, Gadde P. Influence of silver nanoparticles incorporation on flexural strength of heat-cure acrylic denture base resin materials. Annu Res Rev Biol 2017;17(4):1-8.
25. Cevik P, Yildirim‐Bicer AZ. The effect of silica and prepolymer nanoparticles on the mechanical properties of denture base acrylic resin. J Prosthodont. 2018;27(8):763-70.
26. Fishbein L. An overview of environmental and toxicological aspects of aromatic hydrocarbons II. Toluene. Sci Total Environ. 1985;42(3):267-88.
27. Tang E, Cheng G, Pang X, Ma X, Xing F. Synthesis of nano-ZnO/poly (methyl methacrylate) composite microsphere through emulsion polymerization and its UV-shielding property. Colloid Polym Sci. 2006;284(4):422-28.
28. Zhang X, Zhang X, Zhu B, Qian C. Effect of nano ZrO2 on flexural strength and surface hardness of polymethylmethacrylate. Shanghai Kou Qiang Yi Xue. 2011;20(4):358-63.
29. Sahin Z, Ergun G. The assessment of some physical and mechanical properties of PMMA added different forms of nano-ZrO2. JDOH. 2017;10:40- 90.
30. Al-Hiloh SA, Ismail IJ. A study the effect of addition of silanized zirconium oxide nanoparticles on some properties of high-impact heat-cured acrylic resin. JBCD. 2016;28(2):19-25.
31. Nichols G, Byard S, Bloxham MJ, Botterill J, Dawson NJ, Dennis A, et al. A review of the terms agglomerate and aggregate with a recommendation for nomenclature used in powder and particle characterization. J Pharm Sci. 2002;91(10):2103- 09.
32. Xia Y, Zhang F, Xie H, Gu N. Nanoparticle- reinforced resin-based dental composites. J Dent. 2008;36(6):450-55.
33. Yilmaz C, Korkmaz T. The reinforcement effect of nano and microfillers on fracture toughness of two provisional resin materials. Mater Des. 2007;28(7):2063-70.







Creative Commons License © The Authors, published by University of Sulaimani, College of Dentistry